CHEMOTION Route x52 - hybrid hard wax / polymer wax 120g

CHEMOTION Route x52 is a handcrafted exclusive hybrid wax. ROUTE x52 is an exceptionally strong combination of natural and synthetic hard waxes based on the unique Chemotion formula. The precise selection of ingredients of the highest quality made it possible to create a multi-purpose hybrid, the soft texture of which guarantees easy and pleasant use. Properties: Creates an extremely glassy protective film that is slippery to the touch. Darkens and emphasizes the color of the exterior. Effectively covers small scratches. It has very strong hydrophobic properties that last for a long time. It protects against external influences and prevents dirt from sticking. It makes the process of regular grooming much easier. Perfect for any body color. Efficiency: Depending on the size of the vehicle, consumption varies between 5 g and 8 g.

Content:
Each pack contains the original wax jar, a special 3D sticker, a photo with the final prototype with the technical number x52 and an instruction manual in two languages.

Instructions for use:
1. Before applying the wax, clean the body thoroughly with CHEMOTION Active Foam and CHEOMTION Car Shampoo. Remove metallic deposits with Iron Less and asphalt and resin particles with Tar Remover.
2. Dry the body with a soft towel or compressor. Then degrease the paint with IPA or use a cleaning agent.
3. Pick up a small amount of wax with a soft applicator and spread a very thin layer over an element.
4. Prepare a clean microfiber with a compact, dense structure and buff the surface.
5. Proceed to the next point.
6. The final shine can be achieved with microfiber with very soft, long bristles.

Our tip:
1. The best conditions for growing are closed or shady places with gentle air circulation. The temperature at which the application is most comfortable is between 15 and 25 ° C. The paint should be at ambient temperature.
2. After application, we recommend leaving the car in a dry place for a few hours so that the wax can properly bond with the paint. In this way you can achieve the highest durability of protection. The car should not be in contact with water for 24 hours.
3. In the case of badly damaged paintwork, we recommend using Synthetic Glaze as a cleaning agent. This product thoroughly cleans the paintwork and fills voids so that the surface is as smooth as possible before the wax is applied. It is worth letting the glaze sit for at least an hour after applying and then moving on to applying wax. The durability of the protection may change, but the combination of these two products will achieve the best visual effect without the need for mechanical polishing of the paint. 4. Apply a very thin layer of wax. Wait 1 to 2 minutes and polish.
5. If the wax layer is too thick or the temperature is too low, the polishing time will be longer.
6. Hand wash the car. The use of strong chemicals in touchless car washes can shorten the duration of protection.